Tips on Regular Roller Shutter Maintenance

Tags: , , , , ,
March 20, 2019

Commercial or residential, roller doors are operated continuously throughout the course of a day. Repeated use of the doors naturally causes them to wear and tear, thereby causing inconveniences such as noise and limited accessibility. Therefore, it is important to follow regular maintenance measures.

Professional servicing might not always be conveniently affordable. However, roller shutter doors manufacturers such as the Adelaide Roller Doors ensures services are offered within reasonable terms. The following are some of the most fundamental tips on what to consider for regular servicing of roller shutters.

Lubrication Measures

  • Lubrication is the core aspect of a roller shutter. Specifically, it is important to apply oil to the hinge pivots and the screw drive in order to allow them fluent functionality.
  • At the same time, it is important to keep in mind that too much oil should be avoided. Excess oil tends to gather dirt.

Basic Feature Checks

  • It is important to check the safety reverse on a regular basis. The auto safety reverse feature is essential to the overall functionality of the door.
  • Secondly, it is crucial to check the springs. Basically, you need to check whether or not the spring tension is optimal.
  • As far as the springs are concerned, it is important to exercise caution as the springs are tightly coiled and therefore on the verge of snapping.
  • Additionally, if the lift cables are damaged it is recommended to call an expert. In case of replacements, it is highly crucial to replace both springs.

Water Issues

  • It is important to keep in mind that splurging water on the roller door might cause rust and rot. Besides, water might damage the paint.
  • However, while using water it is vital to be careful by not letting it come in excess contact with the bottom of the door.
  • Also, snow might cause major issues. As a preventive measure, it is important to spade the snow away before it melts only to cause further inconvenience.

Check Weather Strip

  • An uncompromising emphasis on the weather strip is put by the industrial door services in Adelaide. The weather strip is crucial to the overall serviceability of the roller door.
  • Specifically, if the rubber seal is somehow frayed or damaged it is advised to repair it right away.
  • Generally, it is recommended to wash the weather strip every two to three months. Advisably, vinyl cleaner should be used.
  • Having done that, a brisk spray of silicone lubricant is highly recommended. The silicone spray is meant to ensure the flexibility of the door and also for keeping the bottom from sticking to the snow.
  • The weather strip is an essential component of the frame of the roller door. It should be wiped nicely around the edges in order to retain its efficiency.

As it is, any mechanical device must be attended to on a regular basis. Machines are always vulnerable to wear and tear due to their consistent usage. Similarly, roller shutters demand sufficient maintenance in order to be able to operate fluently and eventually for a long time.

Leave a Reply

Your email address will not be published. Required fields are marked *